Ender 5 S1 additional bed support (Updated)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod will help strengthen your bed and improve the quality of your prints.
- Rating
- 5 / 5
- Likes
- 134
- Downloads
- 611
- Makes
- 2
- Views
- 5,907
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This mod is still in testing.
I did not test this mod on the factory head! In the future, I will look into this and fix some parts.
I developed this mod because I started noticing Z fluctuations when the bed goes below 100mm from the print start point. I categorically did not want to use an additional Z-axis screw, and after some tests I came to the conclusion that everything would work perfectly without the additional Z-axis screw, even more, the bed began to move more smoothly after installing additional supports, the rigidity of the structure increased significantly.
I use 12mm steel cylindrical rails, I used aluminum supports for fastening to the frame, but if desired, I also modeled a printable version.
List of what you need:
-steel guides 12mm, length 450mm x2
-linear bearing LM12UU x2
-steel screw with hexagon head M4x12mm x4
-steel screw with hexagon head M3x14mm x4
-steel screw with hexagon head M5x15mm x8
-steel screw with hexagon head M5x22mm x4(When using the print support)
-T-nut for aluminum profile M5 x8
-T-nut for aluminum profile M4 x4
-nut with nylon insert M5 x4(When using the print support)
Parts are best printed in ABS, use 30-40% infill for linear bearing holders, use 100% infill for steel shaft supports.