Umikot - Adapter rings to change base depth
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These adapter rings can be used to adjust the height of the needle without printing a new base.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 86
- Makes
- 0
- Views
- 799
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To start off, print the 30mm base
and then adjust the height to desire needle length using these adapter (see reference in Umikot detail). Due to the length of the thread of the screw on the body, can only go down to 23mm depth.
7mm = 23mm depth (be careful, only a bit of thread left)
6mm = 24mm depth
5mm = 25mm depth
4mm = 26mm depth
3mm = 27mm depth
*Flip to print better. Require calibrated printer to print well
*Work with other bases as well, just make sure to subtract the adapter length from the base length to get the adjusted depth