Star Trek Boomerang Phaser emitter plate mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple modification for UnimatrixRed's awesome boomerang phaser.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 152
- Makes
- 3
- Views
- 1,147
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
As I rewatched a Voyager episode yesterday, I realized the type II phasers were equipped with some blue prism tape on the underside of the prefire chamber. As that is quite hard to get, I decided to reproduce this little feature as a 3D printed plate, using silk blue PLA filament.
I recommend setting layer height to about 0,05mm, first layer to 0,1mm, as the entire plate is only about 0,45mm thick.
Special thanks to UnimatrixRed for the amazingly accurate boomerang phaser!
(Please note: This plate was designed to fit the updated v2 boomerang, not the older model.)