1 / 3
Raspberry Pi 7" Touchscreen
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
housing for a rasperry pi with touchscreen and buttons
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 1,407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Some years ago there was an article in Hackspace magazin from Dr Andrew Lewis about a touchscreen for controlling a K40 Laser fitted in a tin-box. I liked the idea, but didn't have access to a suitable tin-box. So I cut a front panel with the laser cutter and printed 3 parts to screw through the plexi into the touchscreen an hold together the cables.
In the bottom 2 magnets 20x3 mm hold the piece on the housing of the laser cutter.