1 / 1
Wanhao Duplicator 6 Meanwell PSU Duct
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improves the cooling for psu on the wanhao duplicator 6.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Improves the cooling for psu on the wanhao duplicator 6 by sucking in air from outside the printer. This reduces recirculation of warm air.
Fits a 2.125" hole or 53-55mm diameter hole
I performed a similar treatment with intaking air to the mobo. Minus a duct.
Printed with flex PLA for a snug fit. Scale up to account for material shrinkage. Print in vase mode 1mm and 0.4mm nozzle. Yes 1mm wide works.