4500 Series Carburetor (Dominator) Base Riser and Gasket 1-1/8 in. Tall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base (bottom side) riser for a Holley Dominator 4500 series Carburetor. Included is a gasket file.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 159
- Makes
- 0
- Views
- 738
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This model is a 1-1/8 in. riser for use under the base of a Holley 4500 Series Dominator Carb. Designed for use with the 1050cfm model. I printed the file with Nylon-CF with 25 percent gyroid infill 0.2mm layer lines and 4 walls. To prevent warping, I did use a 10mm brim. Top and bottom surfaces must be perfectly planar. The gasket can be printed with TPU 95a to be fuel resistant, 100 percent infill. Please use these files at your own risk, print only with confirmed fuel-safe filaments, and be careful when working with fuel systems and engines.