1 / 2
Tennis Racquet Bridging Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quite a snazzy way to test your slicer's bridging settings
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 1
- Views
- 346
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Tennis Racquet Bridging Test
Few things to note:
- Racquet_Handle.stl should be printed with a small brim to prevent it from falling over
- Nozzle width must be .4mm and height must be .2mm to correctly print the strings on Racquet_Head.stl
- Enable “Print Thin Walls” if using Cura
- Print files in the orientation they are loaded in without supports
- You might need to add some glue to make sure the parts fit tightly together