Bambulab P1P alternative lightbar (alternativní světelná lišta)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original lighting was too weak for me. So I decided to make my own solution. (Vyrobil jsem si silnější osvětlení.)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
I used the connector from original the lightbar I bought with my P1P. (Použil jsem konektor co jsem dostal s originálním LED světlem). I used this LED stripe (použil jsem tento LED pásek): https://www.onlineshop.cz/led-pasky/led-pasek-s-usb-geti-gls31c-50-cm-studena-bila-716059P.html
Alternatives on Aliexpress (alternativy):
I cut it to two pieces, one for main holder and one for side part (rozdělil jsem pásek na dva díly podle velikostí hlavního držáku a vedlejšího držáku). I used the 3M pads I got with my P1P (použil jsem 3M lepítka co jsem dostal s tiskárnou).
My models are rough, I am not experienced in 3d modeling. But it does its purpose.
(Mé modely jsou jednoduché, nemám moc zkušeností s 3d modelováním. Ale svůj účel plní.)
