Knull Comic Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
here is another comic cover for yall hope yall like it!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Inland Black Transmission Distance: 0.6
PLA+ Inland Red Transmission Distance: 6
PLA+ Inland Orange Transmission Distance: 5
PLA+ Inland Silver Transmission Distance: 2
PLA+ Inland White Transmission Distance: 4
Swap Instructions:
Black until layer #10 at 0.88mm
Red until layer #17 at 1.44mm
Orange until layer #23 at 1.92mm
Silver until layer #25 at 2.08mm
White for the rest.
Ok i like how this one looks just be ready to be very patient the slicing process takes forever. if you print this file please post your results thanks.