CR-6 SE/Max 6burner version 5.x (dragonfly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6burner V5 bowden mode. Enhanced hotend (40x40 fan) and part cooling (5015 or 4020 blower).
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 398
- Makes
- 12
- Views
- 2,550
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 6burner V5 has been developed after several demands for a slimmer case with aligned fans.
It can be used only in bowden mode with different hotend installed (stock, microswiss, mellow, primacreator, …) and other like dragonfly.
The part cooling is improved by installation of a 5015 or a 4020 radial blower fan. The air channel goes both sides oh the nozzle.
The hotend fan can be either
- the stock (30x30) attached to the hotend
- a 40x40x10 attached to the cover for more versatility with different hotends
NEW !
- V5.2 for Phaetus Dragonfly BMS hotend, adapter and partcooling
- V5.2 bigcover with flat middle surface
OPTION !
- X-Axis MGN9 linear rails base plate inspired by https://www.thingiverse.com/thing:5193032
Please read release notes with mounting instructions.
There is 3 part cooling ducts with different output dimensions.
Files with the extension _kick are for the kickstarter model of CR-6 SE
There is some pictures to show the cabling management, the 2 fan cables are going over the strain gauge and behind the PTFE blocker (black). The heating cartrige cables and the thermistor cables are “pushed” back by the part cooling duct.