Wall mounted box for remotes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box has two compartments, each 65mm by 33mm and 100mm deep. I made it for storing the remotes.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 98
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
This box has two compartments, each 65mm by 33mm and 100mm deep. I made it for storing the remotes.
I used two countersunk M4 wood screws to mount it.
The Scad file contains a variable named "overhang_angle", this determines the angle of the extensions with the holes to screw it into the wall. It used to be accurate, until I made those parts round. Now, it is only approximate, but it was good enough. I leave fixing this to the person who feel challenged to solve this mathematical problem.
Print instructions
Should be straight forward to print. Included gcode uses 70degC bed temperature, as this creates really good stiction on my powder coated bed.