Cap for 8" stove pipe/torpedo style bird feeder/house baffle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These caps will fit over & clamp to nominal 1/2" (actual ~21.4 mm od pipe) or 1" actual OD, and cap 8" stove pipe.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
One of the best types of baffles to reduce the chance of squirrels, racoons and snakes getting to your pipe/pole mounted bird feeder or bird house is a 8" diam stove pipe baffle.
For example: https://nesthollow.com/best-baffle-system-for-my-birdhouse/
2 foot long 8" diameter pieces of stove pipe are widely available at big box stores (in the US) for under $15. This cap is designed to be clamped (using a hose clamp or zip tie) to a bird feeder pole made from nominal ½" pipe (15mm) and be attached to the stove pipe with sheet metal screws. A second design for a 1" / 25.4mm pole is also available. Even though the cap is attached to the pole, the stove pipe can still wobble back and forth, reportably a key attribute to make access difficult for the racoons, snakes. and squirrels.
This has an OD of 209mm. It barely barely fits on the i3 build plate No brim can fit. Skirt loops must be set to zero to avoid toolpath print errors in Prusa slicer.
I printed mine in PETG black.
Fit the cap onto the stove pipe and drill holes in the stove pipe for sheet metal mounting screws. 2 should be enough. Included the option for 4, two with slotted holes to make alignment easier.
Remove the cap
slide the stove pipe over the pole.
Attach the cape to the pole, use a hose clamp or zip tie to tighten the mounting ring on the bottom to the pole to keep it in place.
Attach the stove pipe to the cap with 2-4 sheet metal screws using the holes drilled earlier.