Toy Steering Wheel (with stand)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toy steering wheel with stand/holder to fix between kids legs...
- Rating
- 4.8 / 5
- Likes
- 149
- Downloads
- 554
- Makes
- 6
- Views
- 2,972
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
Your child want to drive a real car or bike - but is waaaaaay to young? No problem - with this steering wheel!
Just print the wheel & stand and add a screw (6mm diameter / 50mm long / max 14 mm head) with 2 nuts to keep it safe. The wheel is 22cm, the stand is 23cm - scale it down, if you need to, but then keep attention to the smaller screw&nuts…
I've also addded a clamp, maybe for a bed, a cardbox car or … anything else.
Have fun printing - and driving!
___________________________
Printing settings wheel:
noozle: 0.40mm
resolution: 0.20mm
material: 100g PLA
support: no
infill: 15% grid
time: 2h 50m
___________________________
Printing settings stand:
noozle: 0.40mm
resolution: 0.20mm
material: 130g PLA
support: maybe with tree for the screwhole
infill: 15% grid
time: 2h 30m