HueForge - Super Mario Bros 3 Cartridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Super Mario Bros. 3 NES Cartridge converted for printing with HueForge!
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 76
- Makes
- 1
- Views
- 1,057
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
This one may take a while to slice! Fake cartridge is scaled to match the size of a real one. From a distance it might
I highly recommend starting with the preconfigured 3mf for your slicer to print this, as they are preconfigured with filament swaps and with settings optimized for slicing speed and print quality for HueForge files.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
Hatchbox True Black PLA
Bambu Red PLA Basic
Bambu Brown PLA Basic
Hatchbox Blue PPLA
Hatchbox Cool Grey
Hatchbox Beige
Hatchbox True Yellow
Bambu White PLA Basic
Swap Instructions:
Black until layer #8 at 0.76mm
Red until layer #25 at 2.12mm
Brown until layer #34 at 2.84mm
Blue until layer #38 at 3.16mm
Grey until layer #47 at 3.88mm
Beige until layer #54 at 4.44mm
Yellow until layer #57 at 4.68mm
White for the rest.