1 / 1
Fastrak Flex Suction Cup Holder (No Support Needed)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-piece Fastrak Flex holder that works with suction cups. Easy and fast to print without support.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Printing
- Print two copies of the STL model as the left and right side is identical
- Print with ABS or any temperature-resistant material if your car is parked outside under the sun. PLA can easily melt/deform under those conditions.
Assembly
- Insert suction cups into the holes
- Pin down one side first
- Pin down the other side while squeezing against the pinned side (this pressure is necessary to prevent fastrak from falling off)
- Clear the bubbles from both suction cups
Non-Printable Materials
- The suction cup model I used is here. Other brands with similar sizes should also work.