NR200 AIO Tophat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of naturalnetworks 'Cooler Master NR200 Case Top Hat Spacer' I would have added the remix in the…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 86
- Makes
- 0
- Views
- 1,002
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of naturalnetworks 'Cooler Master NR200 Case Top Hat Spacer' I would have added the remix in the proper way but Thingiverse is broken again...
This tophat is designed with EK 240 D-RGB AIO in mind, with a rad thickness of 27mm.
The tophat is split in two and I recommend a print bed size of minimum 300mm.
I usually print all my PC parts in PETG because of the heat, but PLA is fine here.
The tophat is screwed down to the chassis of the case with 4 long M3 bolts.
The Fans and rad are both screwed down to the top panel together, and then the top panel clips down onto the tophat.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.1000
Infill:
20
Filament: 3DE Premium PLA
Category: Computer