Artillery Hornet Concentrated Airduct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Concentrate air flow around the nozzle
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 290
- Makes
- 5
- Views
- 1,198
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the “Artillery Hornet - Air Conveyors for Cooling - New Improved Version V3” changing the mounting mechanism. The original had an overcomplicated mounting system that required more precision printing than the stock hornet is capable of, and the mounting prongs were too long. I swapped them for a small compliant spring allowing for the duct to be printed in one piece. Now it just slides from the back of the printing head. You can bend the front inwards to catch both sides and push it in, the spring will add outwards pressure securing it in place.
Printed in PLA, no supports (needed some cleanup), 0.2mm layers.
To make it fit even better consider heating the nozzle and then using pliers to push on the sides from the inside.