Action Master Megatron Neutro-Fusion Tank Missile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement red missiles for the Action Master Megatron Neutro-Fusion tank. Works in Tank and Base modes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
This is a re-created replacement missile for the G1 Action Master Megatron Neutro-Fusion Tank. It's as close to the original design as I could get with calipers and test prints. The example photos included are from a Prusa i3 MK2.5S printed at 0.15 mm layer height. In the included Tank photo the top missile is 3D printed, the bottom is the original.
Recommended Print Settings (FDM)
The top and bottom of the missile have very small contact surfaces, matching the original toy. You can either cut the model to remove the extra piece at the back, or print slowly on the first layer with supports.
Resolution: 0.15mm or 0.10mm
Support: Yes
Brim: Optional
I've only printed this with a FDM printer, but a resin print should give even better detail.