Controller Stand Badge System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This badge "system" enables you to mark your Xbox or PS5 controller stands (and more in the future) with badges!
- Rating
- 4.8 / 5
- Likes
- 588
- Downloads
- 2,314
- Makes
- 19
- Views
- 13,692
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After posting my first remix, the XBox Controller - Starfield Edition, I realized that others might want different games shown instead of the one I made.
So I redesigned the model by placing a couple of voids in the middle of the stands, allowing you the ability to place your own badges on your stand. There are controller bases for Xbox (2 types), PlayStation 5 (2 types), PlayStation 4, and the Switch Pro Controller.
Stand Print Settings:
- No rafts.
- No supports.
- Layer Height: 0.1 - 0.2mm
Badges:
- No rafts.
- Some require support; check for overhangs.
- Layer Height: I'd recommend a .2 nozzle, or at the very least, a .4 nozzle set to .08 printing.
Checkout:
Make sure to check out the Magnetic Storage Base for the PS5 Controller made by jpbear09.
Make your own:
If you want to make your own badges, I have included blanks, so all you need to do is place your favorite logo on them. (Thanks to Gummibjorn for the idea!)
To make a logo, you can find or create a PNG file and then use a website such as convertio to convert them to the SVG format, which you can then import into your slicer (if supported).
They should be the following dimensions:
- X: 39.96
- Y: 39.96
- Z: 10+
I have also included a pin to help push out any stubborn badges. Printing it as an STL may require support.
Notes: There appears to be what looks like a crack that appears in the switch STL version. I looked at it a,nd it appears when I import the original model into tinkeTinkercadrcad. I'll notify the author and see if they have any ideas. I am printing another copy of the base to see if it appears. Thanks again to Gummibjorn for notifying me about this.