Tree Supported Planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Planter suspended by tree supports with a dish for catching water.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Basic plant pot with drainage and a dish, suspended by tree supports.
I included the slicer file that I used to make the pictured planter on my MK3S+, you will need to be running Prusaslicer 2.6 to utilize the organic supports feature. Play with the organic support settings to customize your trunks and branches. It's kinda fickle keeping the tree on the dish and not the build plate though, so set aside some time to play with settings to see what everything does.
If you're starting your own file from scratch, I set supports to only the brim and underside of the pot. You'll want to set your supports to part gap to zero so that the pot and dish fully adhere to the supports.
I printed with PLA at a .3mm layer height, 15% infill, 4 walls, 3 bottom layers, 3 top layers.