Cynthia Bolt Action Blaster - Fudd Foregrip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Fudd frontend, so-called due to its similarity to that of a hunting rifle. It's considerably wider than…
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 158
- Makes
- 0
- Views
- 1,927
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Fudd frontend, so-called due to its similarity to that of a hunting rifle.
It's considerably wider than the normal Cynthia frontend options, as well as shorter vertically. However, it's 5cm longer in the barrel axis, so if you're cutting it close on barrel length already, this probably isn't for you. It's pictured here with a 35cm barrel and a BCAR that sits decently far down the barrel (the barrel itself ends just before the vents on the BCAR). I wouldn't recommend it for anything shorter unless you have a very small muzzle attachment. You'll need all four files.
You'll also need a 5cm longer threaded rod than the one Cynthia normally uses.TECHNICALLY it works just fine without it but you should really use it. I'm sure your hardware store has one that'll work. #6-32 or #6-24 are just fine (just use the right nut). I'm sure metric equivalents would probably also work. just needs to fit in the space really.
Category: Sport & Outdoors