1 / 8
Pool diving toy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enjoy summer diving in the pool with this submerging toy
- Rating
- 5 / 5
- Likes
- 161
- Downloads
- 321
- Makes
- 1
- Views
- 3,758
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
Submerging toy for summer fun in the pool. It always ends up standing perpendicular to the bottom, so it's easy to grab during diving.
Print settings and postprocess:
- PETG recommended.
- Must be as heavy as possible, thus print with 99 % infill.
- Overal weight should exceed 205 g, otherwise it won't submerge.
- Glue both ring parts together, provided pins will help you with alignment. Insert and glue in weight part. Superglue works just fine.
- Model can be easily scaled to fit smaller build plates.
- Provided are 3mf projects for Prusa and Bambu Lab with all the settings
Tisk a postprocess:
- Doporučuji tisknout z PETG.
- Musí být co nejtěžší, proto 99% výplň.
- Celková hmotnost by měla být vyšší než 205 g, aby se hračka potopila na dno.
- Po vytištění slepte obě poloviny kruhu k sobě (vytisknuté piny vám pomohou se sesazením) a vstrčte a vlepte třetí část. Vteřinové lepidlo stačí.
- Model můžete snadno zmenšit, aby se vešel na podložku menších tiskáren.
- Stáhněte si rovnou 3mf projekt pro Průšu nebo Bambu Lab s výše zmíněným nastavením