Ikea VINDSTYRKA hanging mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A few parts to allow the VINDSTYRKA to be hung from any wall you want - starting with a gopro mount
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This model is composed of 4 parts and requires 4x m3 nuts and 4x m3 bolts of at least 20mm
I chose the gopro mount bracket as it allows it to dual purpose on a gopro clamp, but also there are plenty of models out there like Skadis gopro mounts which would allow this to be hung on a skadis board.
The mounting bracket is slotted over the bottom back brace, the top back brace is interlocked with the bottom brace.
Press the nuts into the slots on the inside of the braces
Screw in the bolts from the back, through the model and through the nuts.
Place on back of the VINDSTYRKA
Slot in the top place to the dovetail.
Mount on the wall (or to whatever surface you need)