1 / 3
Single 18650 UPS Circuit Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No supports needed, but you will have to poke out a single layer that I used for the inset m3 screw heads.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 165
- Makes
- 1
- Views
- 1,875
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
No supports needed, but you will have to poke out a single layer that I used for the inset m3 screw heads.
Requires Four M3x10 screws to hold it together.
This is a holder for those single 18650 holder and protection boards that also provide a UPS style 5V/12V boost circuit that one can find on AliExpress.
This design is for a board sized 89x22mm with an SMD battery holder.
Print instructions
0.4mm nozzle
0.2mm layer height
3 perimeters
20% infill