1 / 2
Skullman
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created with Hueforge
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 252
- Makes
- 6
- Views
- 1,966
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
This is my first try with hueforge.
I have printed this with BambuLab's X1 Carbon scaled down to 60% an it turned out great.
Don‘t have an MMU or AMS?
No problem! Just change the filament manualy. There are only 3 changes for black, grey and white.
Print instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Black until layer #7 at 0.64mm
Gray until layer #12 at 1.04mm
White for the rest.
Happy printing. :-)