1 / 4
Mouse Bungee
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The mouse cable is secured to the tip of the spring using zip ties, and the spring is fixed at the desired angle using M3x14mm screws and M3 nuts.
I recommend the following three methods for securing it to the desk:
- Use double-sided tape to secure it.
- Attach rubber pads to the underside.
- Place it between the mouse pad and the desk.
Print Settings:
- Material: PETG (recommend)
- Layer height: 0.20mm
- Supports: no