1 / 9
Siphon Fed Airbrush Cup (Badger, Paasche, Binks, ect.)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement cup for siphon fed airbrushing. Tested with Badger 150, Paasche Type H, and Binks Wren A
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 113
- Makes
- 0
- Views
- 696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement cup for siphon fed airbrushing. I wanted a few extra cups without spending a ton of money and I also just wanted to see if I could. There are two sizes, one standard and one large capacity.
These were printed in resin, but I have gotten it to work with FDM by smothering the straw in superglue to make sure there are no air leaks.
I have included the straw and cup as separate things so that you can print them and glue them together. (Untested)
Category: Art