Solder tip cleaning station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found a lot of different tip cleaner models out there, but no one fit my needs. So I designed my own.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 331
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found a lot of different tip cleaner models out there, but no one fit my needs. So I designed my own. It holds a sponge (5x5xm), a Stannol tippy and a cleaning wire/brass wool.
I printed it with blue Prusament PETG so get a nice contrast for the brass/gold look and Petg to get a little bit more heat resistance. (I have no ABS or equal).
The Fusion360 file is included if someone needs to make changes.
PS:
The print quality from my printed version (see photo) is not the best. It warped after 50% of the time. (Sheet was not clean enough) Since it is only a hobby object anyway, I did not cancel the print and throw away the plastic, but let the print run through.
Print instructions
- 0.2 layer height
- 20% infill
- no support
- 3 perimeters
- Monotonic pattern for a nicer look
- if you like, you can turn on ironing