The Puzzle Gift Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.79 – €5.86 net (excluding VAT)
For file: puzzle-box-inner-and-back-cover_015mm_pla_mk3s_.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.33 excluding VAT (range midpoint).
- Weight reported by the author
- 53 g
- Print time reported by the author
- 5.98 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
NIce easy Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how!
- Rating
- 4 / 5
- Likes
- 90
- Downloads
- 552
- Makes
- 4
- Views
- 7,369
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NIce easy Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how!
I have seen people puzzle on this for an hour+ - but if you know how, you can intantly open the box - and retrieve the prize!
Please share your comments!
Print instructions
The Puzzle Box II
NIce easy Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how!
I have seen people puzzle on this for an hour+ - but if you know how, you can intantly open the box - and retrieve the prize!
Printing Instructions
I printed mine with Red & Gray PLA+ - this box is an easy print, requiring no supports.
I have include pre-sliced files, with the color change on the main box. The box comes as three parts: The main outer box, The inner drawer, and the back plate for the inner drawer. All box parts need to be printed with the same color, the only color change is with the outer box (the two 13mm bands)
When I sliced my prints, I added pauses for the color change - this color change, while not mandatory - helps sell the impossible nature even more!
See the included Color Change Photo for timing!
After printing - use super glue to connect the back plate to the inner box (see pictures). After you are positive the glue has set (Don't glue the box and drawer together), slide the two halves together slowly and check for binding. Do Not close it all the way - If it binds too much - you will not be able to re-open the box - I used a nail file on the inner drawer to adjust fit.