PRUSA "Magic Wall" for extrusion rotation indicadors

This gadget allows you to store up to 5 of the popular extruder rotation indicators. It is attached to the MK2/S, MK2.5/S and MK3/S+ frames using magnets so you can easily remove it in case is necessary. For the design I was inspired by the Prusa Reception Tiles design

Print instructions

Printing:

Print main part at 0.15 mm height. The print is designed so that you can make a color change at the last 2 layers to get a beatiful two color print in a simple way (only with 1 filament change).
New ironing feature avalilable on latest version of PrusaSlicer is enabled and used for last top layer.

Print supports at 0.2 mm height.

I have attached the following files on this print:

1.- MK3S gcodes for 2 color print (1 color change at the last 2 layers) of main part and supports.
2.- .3mf files for main part and supports
3.- .slt files for main part and supports
4.- *.scad files if you wish to remix or modify my design.

Assembly:

You will need up to 7 8x3 mm neodymium magnet (same as used for rotation indicators). For the assembly press-fit magnets to holes on main parts. If assembly is difficult by hand you may need a small hammer (be carefull!!). Be sure that magnets have the proper orientation - If not rotation indicators will not attach to the "Magic Wall".