sfpmm - single front panel magnetic mount solution for vorons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fast and reliable solution for removing and closing your single front panel on your voron v2 or trident
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
magnetic single front panel solution for 6mm thick glass and 3mm foam
Be careful when drilling arcrylic glass, it breaks much more easily than PC. i recommend to use PC panels
handles are a modified version (M5 instead of M6) of
https://www.printables.com/de/model/110667-ratrig-v-core-3-enclosure-handles
my panels where slighty too tall so i had to take away some material with a roundfile where the screws are , as shown in the last photo. please check if this is necessary with your panel dimensions (not all panels have exactly the same size).
settings and material:
ABS/ASA (i used 3djake ASA)
0.4 nozzle
4 top/bottom layer
4walls
30% infill
screws/BOM:
4x M5 16mm BHCS
4x M5 nuts
12x M3 10mm BHCS (probably 8mm also works)
12x M3 nuts
16x M3 10mm SHCS
16x hammerhead nuts (T-nuts should work too)
40x magnets (6 x 3 mm round shape) - i used a mix of n35 and stronger ones (probably n45 or n52)