1 / 2
FilaFix (fixed filament clip)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FilaFix (fixed filament clip)
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 1
- Views
- 199
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
No more fiddling around with loose filament clips, or filament bent when pulled through the holes in the spool.
This clip is ment to be glued to the inside of the spool. The low-profile design means that it won't interfere with the filament during printing.
Printing:
0.2 mm layer height or lower.
Print as oriented in stl file, and without support.
Mounting:
Add a small amount of super glue to the flat side of the clip.
Place as close to the perimeter of the spool as possible.
The clip may not fit on a totally full spool.