1 / 3
Phone Hat compatible with Sonos Move
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.81 – €4.66 net (excluding VAT)
For file: PhoneHat_0.6n_0.3mm_PETG_MK3SMMU2S_3h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.23 excluding VAT (range midpoint).
- Weight reported by the author
- 79 g
- Print time reported by the author
- 3.24 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Give your Sonos Move a little hat to hold your phone
- Rating
- 3 / 5
- Likes
- 3
- Downloads
- 49
- Makes
- 0
- Views
- 606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This turns your Sonos Move into a phone holder.
Features:
- Holds any device (in landscape) up to 10cm/3.9 inches wide
- All buttons and lights on top of the Move are still accessible
- You can still grab the Move by the handle and carry it around
Caveats:
- Optimized for a 0.6mm nozzle, but it should print just fine with other nozzles
- This model is not an elegant fit, but it gets the job done
- This model requires supports, but I have found Organic Supports come off easily
- Because this model is so close to the Sonos Move microphones, you may want to disable "Trueplay”