Emerald Dragon Hueforge filament painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An emerald dragon Hueforge model
- Rating
- 5 / 5
- Likes
- 101
- Downloads
- 201
- Makes
- 2
- Views
- 1,583
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
5 Color Hueforge model of an “Emerald” Dragon.
DO NOT RESCALE
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Matter Hackers “build series” Light Blue Transmission Distance: 14
PLA Matter Hackers “build series” blue Transmission Distance: 6.5
PLA Matter Hackers “build series” Forest Green Transmission Distance: 2.3
PLA Elegoo White Transmission Distance: 10
Swap Instructions:
Black until layer #12 at 1.12mm
Light Blue until layer #14 at 1.28mm
blue until layer #16 at 1.44mm
Forest Green until layer #18 at 1.6mm
White for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.
Use the exact numbers in your slicer to match up properly.