1 / 1
Hueforge - Goku v1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA PolyLite Pro Red Transmission Distance: 1.5
PLA+ Sunlu Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Black until layer #12 at 1.04mm
Red until layer #26 at 2.16mm
Pure Yellow until layer #33 at 2.72mm
White for the rest.