1 / 3
Power Socket Bracket with RJ45 Keystone
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket is designed for a typical power socket with a fuse and switch as well as an RJ45 keystone.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 18
- Makes
- 0
- Views
- 582
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I created it to mount it to an Ikea Lack. If you like to put it on the opposite side, you can just mirror it in your slicer.
Since my socket wasn't symmetrical I included different versions. In my case, the screw holes are a bit offset in the direction of the power socket, so please measure and select yourself. The offset is ± 0,42mm
What you need:
- typical power socket with fuse and switch
- 2* M3 heat-set inserts
- 2* short M3 countersunk screw
- RJ45 keystone
- 5* 3mm (or 2,5mm) wood screw (the lowest at the faceplate with a max. length of 25mm)
Attention: insert the keystone only if you are sure, it's possible, but not easy to remove