1 / 1
Greyscale Ferdinand [Ascendance of a Bookworm]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fanart drawing of Ferdinand from Ascendance of a Bookworm (Honzuki no Gekokujou)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Drawing of Ferdinand made by user ALOS.
Made using HueForge.
Print Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Swap Instructions:
- Black until layer #10 at 0.92mm
- Dark Gray until layer #19 at 1.64mm
- Light Gray until layer #33 at 2.76mm
- White for the rest.