Star Wars AT-AT Kit Card
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.46 – €4.22 net (excluding VAT)
For file: Star Wars AT AT v17_0.15mm_PLA_MK3S_4h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.84 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 4.37 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Star Wars AT-AT Kit Card. Imperialer Walker Ep. 5.
- Rating
- 4.667 / 5
- Likes
- 975
- Downloads
- 2,954
- Makes
- 16
- Views
- 16,364
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- GNU General Public License v2.0
Next Update: In the next two weeks the building instructions will come with pictures for each step.
Update 13.07.23/ Version 17: The head mount has changed, now it fits better. The "ventilation plates" were also shortened to create some space.
Armored Transport (AT-AT) was a quadrupedal walker used by the Galactic Empire after the fall of the Galactic Republic. With a height of over 20 meters, the walker relied heavily on intimidation. But this model is an littel bit smaller. Remove all pieces from the cart. Then it is a small puzzle.
PS: Should there be something complicated, the Death Star wasn't built in a day either.
Update 12.07.23/ Version 14:
First, the tolerances have been revised and the print strength has been adjusted to 0.15mm. The second major adjustment is that the head now consists of only two parts. Once the head and the matching cover plate. Unfortunately, this was necessary because the predecessor was too error-prone. The feet also had to be smaller to fit under the base plate.
Update 11.07.23 : Some fixes at the head and baseplate for better fitting. Now everthing should work.