1 / 3
HueForge Spiderman
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge Spiderman hanging from the wall.
- Rating
- 5 / 5
- Likes
- 133
- Downloads
- 770
- Makes
- 7
- Views
- 3,248
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
JAYO Black Transmission Distance: 0.3
PolyTerra Army Red Transmission Distance: 0.3
PolyLite Blue Transmission Distance: 1
JAYO White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mms
Army Red until layer #10 at 0.88mms
Blue until layer #19 at 1.6mms
White until layer #39 at 3.2mms