Electrical grass applicator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.67 – €0.81 net (excluding VAT)
For file: cover-top_02mm_pla_mk3s_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For the easier application of static grass on the model of railway, I created a model of grass applicator.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 1,271
- Makes
- 6
- Views
- 8,158
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/
Print instructions
Everything was printed on Original Prusa I3 MK3S printer from Prusament PLA material. You can use presliced gcode with all the parts on one plate or each part separately. You can also customize settings in PrusaSlicer using the 3MF file.
The strainer was printed with the help of modifier in PrusaSlicer with 0 bottom and top layers and increased grid infill to 25%