Presto Dehydrator Stackable Filament Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have some BIG spools of PETG (14" across) that needed to be dried, and it just so happens that the fit in the…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 71
- Makes
- 1
- Views
- 1,384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I have some BIG spools of PETG (14" across) that needed to be dried, and it just so happens that the fit in the diameter of the Presto brand food dehydrator from Walmart.
I designed these dryer sections to hold filament spools up to 14.25" across, be stackable, and to be printed using a large-diameter nozzle and thick line width for strength. They're a tight fit at first, but the PETG shrinks a little bit as it gets warmed and contracts. The sections can fit one 4 kg spool or 2 partially-used 1kg spools.
Print instructions
Category: 3D Printer Accessories Summary
I have some BIG spools of PETG (14" across) that needed to be dried, and it just so happens that the fit in the diameter of the Presto brand food dehydrator from Walmart.
I designed these dryer sections to hold filament spools up to 14.25" across, be stackable, and to be printed using a large-diameter nozzle and thick line width for strength. They're a tight fit at first, but the PETG shrinks a little bit as it gets warmed and contracts. The sections can fit one 4 kg spool or 2 partially-used 1kg spools.
Print Settings
Printer:
Xinkebot Orca
Rafts:
No
</div>Supports:No
Resolution:
0.3 mm
</div>Infill:15%
Filament: FilaMatrix PETG Clear
Notes:
This is BIG, and needs a printer with a 400x40 0mm build platform. I printed with a 0.6 mm nozzle and 0.9 mm line width; a 0.8 mm nozzle and 1.2 mm line width might be even better.
To get the bottom lattice, I printed with zero top or bottom layers, 3 perimeters, and 15% honeycomb infill.Printed with a brim just to be safe.