Kit Card Ford-T
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.56 – €1.91 net (excluding VAT)
For file: placka-06b_0.15_PLA_2h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 2.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Po vylámání dílů lze složit model automobilu Ford T
- Rating
- 4.6 / 5
- Likes
- 479
- Downloads
- 1,689
- Makes
- 12
- Views
- 7,494
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial
Stavebnice několika automobilů mám již ve své kolekci “Automobil ” ale výzvě sestavit model automobilu jako kit card system se nedalo odolat.
materiál PLA
tryska 0,4 mm
vrstvy 0,15
pro úspěšné sestavení dílů je užitečné mít správně nastavenou první vrstvu 0,2 G-code tiskový soubor “03” je pro tisk jednobarevný, soubor “04” pro barevný tisk a soubor “05” je pro tiskárny doplněné o MMU jako prémii přikládám soubor ” 06 " pro ty, kdo nechtějí díly vylamovat a samostatné soubory pro tisk poškozeného či ztraceného dílku . G-code tiskové soubory “06”jsou pro tisk jednobarevný, soubory “06b”pro barevný tisk a soubory “06ba” jsou pro tiskárny doplněné o MMU
další varianty modelů aut jsou v mé kolekci “ Automobil ”
I already have the kits of several cars in my "Automobil" collection, but I couldn't resist the challenge of building a car model as a kit card system. is useful to have the first layer of 0.2mm set correctly for successful assembly of the parts G-code print file “03” is for monochrome printing, file “04” for color printing and file “05” is for MMU-equipped printers as a premium, I am attaching the file "06" for those who do not want to break out the parts and separate files for printing a damaged or lost part . G-code print files “06” are monochrome for printing, files “06b” for color printing and files “06ba” are for MMU-equipped printers
other variants of car models are in my collection " Automobil "