[Iteration 2W] Credit Card-sized Phone Stand (CCsPS)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.63 – €0.76 net (excluding VAT)
For file: CCsPS i2 - 11.5mm slot_0.4n_0.15mm_PLA_MINI_41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 40.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tired of having your phone stand flop around in your wallet? CCsPS to the rescue!
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 1
- Views
- 521
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Credit Card-sized Phone Stand (CCsPS)
Tired of having your phone stand flop around in your wallet?
Here comes this one!
Unlike other phone stands of this size, not only do you not require multiple materials, but also it doesn't require to be folded and can be just one, big part, therefore, it's much more rigid.
EDIT 2 (27th May 2026):
With iteration 2W (i2W), a more stable, wide-size format is now available with the same phone thickness range as before!
NOTE: Print files and printed model pictures coming soon. Actual models are still in testing phase.
EDIT (14th July 2023):
With iteration 2 (i2), the files are not only more accurate but also have slot widths ranging from 9mm to 14,5mm in 0,5mm steps. You can also find the original models, though you should probably use i2.
In the files, you will find not only STL model files, but also GCODE print files for your Original Prusa MINI/+ printer.
Ideas for improvement:
- Potential holeless design for adding text, etc.
- Thinner, sleeker design to fit more cramped wallets
I will try to make improvements to this model, however, this may take some time.
You can print this out of any material, however, PLA will work just fine.
Supports are not required and you are encouraged not to use them with this model.
The model on the pictures was printed using these printer settings:
Printer: Original Prusa MINI+
Filament: Prusament PLA Gentleman's Grey
Profile: Default PrusaSlicer printer profile
Infill: 100%, rectilinear
Layer height and profile: 0,15mm SPEED
Print time: ~40 min
Licensed under the CC-BY-NA-SA for non-commercial use. Want to use this model commercially? Leave me a message on Printables! |