1 / 2
Alesis Mesh Trigger Kick Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hacky print for converting an Alesis Mesh Trigger into a Kick trigger
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Note: these prints are very hacky and simple. Would not recommend printing because:
- long print time
- large amount of print material
- not straightforward assembly/tuning
- lack of stress-testing.
Requires
- 5A drum stick for mounting
- Tape (for wrapping around the drum stick)
- Adhesive/glue for construction
Recommended
- Rubber mallet for lightly hammering in drum stick
- Using against a wall for support/stability
- The recommended print orientation is in the .3mf file
Assembly notes
- The drum stick for mounting is friction-fit (which is strong/stable enough I guess). The hole is oversized and I gradually added tape to the stick to add thickness until I could hammer it in snug.
- KickSwivelStoppers are used for stabilizing the trigger. I printed 2 of them; they are glued on top of the main piece and press against the left/right side of the bottom edge of the trigger
- KickClampNegative is for interfacing with your kick pedal clamp. Glue to the stand based on your ideal kick pedal location.
See picture for assembled