Geeetech Prusa i3 Pro B Bed Level Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
01/05/2020 Update: I added a bigger screw and a rise for the Z level. Not sure about others but I always had problems…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 76
- Makes
- 0
- Views
- 584
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
01/05/2020 Update:
I added a bigger screw and a rise for the Z level. Not sure about others but I always had problems that the screw was to short and difficult. With the rise there is now more space and the screw is easy to adjust.
For easy bed leveling I wanted a kit which makes it possible to level the bed with one hand and without tools. Also I didnt like the glas holder clips.
I added napalms lower bed level fix to the set. I used bernbouts new level clamps and added the fix part to fit the size of the i3 Pro B heat board. Finally I customized bertkatts knob to fit for my needs. The knob is so small that it wont be in the way when priniting and can also be used to turn the Z end stop screw.
I replaced all 4 corner screws and the Z end stop screw with a M3 hex bolt from here https://schrauben-expert.de/Sechskantschraube-DIN-933-M3-x-40-Edelstahl-V2A?curr=EUR&gclid=EAIaIQobChMIzMC32PTf5gIVwawYCh38fgGuEAQYASABEgLy4PD_BwE.
Its first work, hope you like it!
Print Settings
Printer:
Geeetech Prusa i3 Pro B
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament:
Geeetech PLA,ABSAs you wish
Category: 3D Printer Parts