Airhorn2Arca - Tiny Butane Canister to Tripod Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to attach the tiny butane stove from backpackinglight.com to a standard Arca tripod head
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
The Airhorn2Arca adapter is inspired by this thread on backpackinglight.com.
Ultralight backpackers always look for ways to shave a few grams off their gear. With that in mind, even the smallest commercially available butane canister is too large for a short weekend trip. Some clever people came up with a way to use smaller airhorn canisters instead. See the thread for details.
Since the airhorn canister needs to be supported in some way, I created this tripod adapter for standard Arca clamps. I always carry a small tripod in the mountains, which combined with the adapter provides a great cooking platform without the risk of tipping the stove over.
The version marked as ‘tight’ provides a nice friction fit. Since your mileage with a different printer may vary, I also provide a ‘lose’ version that has an 0.2mm wider opening for the canister. I recommend to glue the adapter onto the canister with either option.
I printed at 0.1mm layer height with 8 vertical perimeters to ensure enough strength in the clamping area, and to make the four columns solid. PLA, 8% infill, no supports or brim needed.
These settings should provide a nicely finished print, with a good balance between weight and strength. The ‘tight’ version with settings as above weighs 10g.
Update 30/9/24:
I simplified and strengthened the design. Printed in PETG the adapter was 20% lighter, with a gap at the bottom to allow for air circulation to the underside of the canister.