1 / 3
Guitar Neck Rest
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 in 1 Functional Guitar Neck Rest
- Rating
- 4.969 / 5
- Likes
- 367
- Downloads
- 3,266
- Makes
- 38
- Views
- 7,032
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
2 in 1 Functional Guitar Neck Rest.
- Curved design that hugs the back of the neck for the perfect fit.
- Suitable for most guitars, basses, ukulele, mandolin, banjo and more.
- Two height design that can suit different instruments
Recommended Print settings
- Infill: 15%
- Wall count: 4
- Solid top/bottom layers : 4
Filament:
- PLA/ABS it's all up to you.
File is oriented in preferred orientation so no support is needed.
I added some pieces of leather, glued on using 3M Hi-Tack 76 Spray Adhesive, remember to mask of the parts that you don't want glue on (i didn't). You can also use cork sheet if you don't have some scrap leather laying around.