1 / 3
LITHOPHANE STAND BASE WITH DYNAMIC ANGLE FOR IKEA KAPPLAKE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided to make a lithophane rack that would suit my different lithophane models.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 350
- Makes
- 1
- Views
- 2,329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
LITHOPHANE STAND BASE WITH DYNAMIC ANGLE FOR IKEA KAPPLAKE
Nozzle: 0.4 mm
Layer height: 0.2 mm
Print speed: 40 mm/s
Infill: 20%
Supports: no
Filament used: ~15 grams
Print time: ~2h
Remark: The stand is suitable for litho models with a maximum width of 12 cm and a height of up to 15 cm. The litho model must not be thicker than 3 mm.