LayersFactory
Report model
1 / 3
Chicken Perch — image 1
1 / 3

Chicken Perch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sherlock_Ohms

Sherlock_Ohms

@Sherlock_Ohms

Attachment for a common 2-by deck baluster to make a chicken perch in your coop or run.

Rating
5 / 5
Likes
58
Downloads
156
Makes
0
Views
1,434
Reviews
1

Updated at source:

Model information

Source
Printables
Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (2)Makes & comments (Makes: 0) (Comments: 2)Remixes (0)Collections (86)Related

There are two versions.  One has attachments only on the top and bottom.  The other has attachments on all 4 sides, making it a bit sturdier on the post.  

I attached mine to our 4x4 post in our chicken run and cut the baluster down to size.  The baluster also utilizes screws.

I used #8 exterior screws. 

Print Settings:

  • >4 perimeters
  • >15% infill
  • ≥2mm layer height
  • No supports needed
  • PETG recommended if in high temperature regions

Balusters:

https://www.lowes.com/pd/Severe-Weather-Common-2-in-x-2-in-x-36-in-Actual-1-31-in-x-1-31-in-x-35-75-in-Pressure-Treated-Brown-Deck-Baluster/50279739

 

 

Tags

petanimalchickencoop