Hextraction Board for Small Build Plates (148x153)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.24 – €0.29 net (excluding VAT)
For file: Clip_0.4n_0.2mm_PETG_MINI_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 17.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print Hextraction on your Prusa Mini+! Smaller sections for Voidstar Lab's Hextraction board.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 831
- Makes
- 7
- Views
- 2,370
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included here.
I wanted to print Hextraction, but I found that the included board sections were much too large for my Prusa Mini+'s print bed. Since Zack made the original Fusion 360 files available, I was able to create 7 segment and 4 segment sections that fit together to create the original board. To ensure strength between the parts, I also created tweaked clips with “tabs” on both sides to fasten pieces on a side (as opposed to the original clips, which are designed for only top/bottom fastening).
Check out the images to see how things fit together and what I believe are the optimal clip locations. I placed the custom clips between the binder clips and the original clips on the 5 horizontal borders between the top and bottom sections.
Make sure your board notches are aligned before you glue!
Finally, check out Hextraction at https://www.playhextraction.com!